3mm vs 6mm 4D Number Plates: What’s the Difference?
3mm vs 6mm 4D number plates, the short answer: the number is the depth of the raised acrylic characters, nothing else. A 3mm plate has characters that stand 3mm proud of the plate, and a 6mm plate has characters twice as deep, which throws a heavier shadow and looks bolder from the side. The characters are the same legal height, width and spacing on both, and both are road legal when they’re made properly. From us, 4D 3mm plates are £44.99 a pair and 4D 6mm are £64.99.
Written by the PlateBoss team, led by owner HD. We’ve been making plates since 2019 and are a DVLA-registered number plate supplier with a workshop in Hounslow, west London. Checked against GOV.UK, DVLA INF104 and DVLA guidance on raised characters, October 2026. How we write our guides.
In this guide
- What 3mm and 6mm measure
- Side by side
- Are 6mm 4D plates legal?
- How each one looks
- Checks before you choose 6mm
- Gel or no gel?
- What we see at the counter
- FAQs

What the 3mm and 6mm actually measure
A 4D plate is a normal reflective plate with laser-cut acrylic characters bonded on top. That’s the difference from a 3D gel plate, where the raised look comes from a dome of resin over printed characters. Our guide to 3D vs 4D number plates covers that choice, and what 4D number plates are explains the background.
The 3mm or 6mm is how thick that acrylic is, so it’s how far each character sticks out from the face of the plate. It doesn’t change anything you’d measure with a ruler held flat against the plate. On a car registered from September 2001, every character is still 79mm tall and 50mm wide (except 1 and I), with 11mm between characters and 33mm between the two groups. Those sizes come from DVLA and they’re the same on a printed plate, a 3mm plate and a 6mm plate.
The choice between the two is purely about depth and shadow.
3mm vs 6mm 4D number plates side by side
| 4D 3mm | 4D 6mm | |
|---|---|---|
| Character depth | 3mm | 6mm |
| Character size and spacing | Legal DVLA sizes | Legal DVLA sizes (identical) |
| Look | Clean raised edge, subtle shadow | Deeper shadow, bolder from an angle |
| Price (pair) | £44.99 | £64.99 |
| With a gel finish (pair) | £59.99 | £79.99 |
| Share of our 4D orders | About 90% | About 10% |
| Road legal? | Yes, if made to the rules | Yes, if made to the rules |
Are 6mm 4D plates legal?
Yes, when they’re made correctly. Nothing in UK law sets a maximum depth for raised characters, so 6mm isn’t any less legal than 3mm. What matters is that the whole plate still meets the rules.
GOV.UK lists 3D (raised) characters as something a number plate is allowed to have. The same page says the plate must be made from reflective material, show black characters on a white plate at the front and a yellow plate at the back, have no background pattern, and carry the BS AU 145e marking if it was fitted after 1 September 2021. Plates fitted after that date must also use a single shade of black, and the characters must not be removable or reflective.
DVLA went further in a letter to the British Number Plate Manufacturers Association in May 2021, written about 3D gel and “so-called 4D” plates. The points that matter for depth are:
- The sides of the characters must be black too. Any colour on the characters is illegal, and DVLA said the black requirement includes the sides of raised characters. On a 6mm plate there’s twice as much side showing, so this matters more. Our acrylic is black right through, sides included.
- The characters can’t be removable. DVLA said they should be stuck on at least as well as the British Standard expects a plate to be stuck to a car.
- They must stay readable. A plate must not be made in any way that makes the characters harder to read by eye or harder for a camera to photograph.
DVLA also said this shouldn’t be read as the Agency endorsing raised characters, and that it could look at the issue again if they turn out to cause readability problems. In short, raised characters are allowed today, they aren’t officially endorsed, and the rules could change. Our guide are 4D plates legal? goes through the wider rules.
A plate that breaks the rules can get you a fine of up to £1,000, and GOV.UK says the car will fail its MOT with incorrectly displayed plates.
Know which depth you want? Build your 4D plates online and see the price before you order.
Choose your 4D platesAsk us on WhatsAppHow each one looks on the car
Look at a 4D plate straight on and you’ll struggle to tell 3mm from 6mm. The difference shows from an angle and in low sun, when the characters cast a shadow onto the plate. The deeper the character, the longer that shadow.
- 3mm gives a crisp raised edge you notice when you walk past the car. It’s by far our most popular depth: about 9 in 10 of the 4D plates we make are 3mm.
- 6mm is the one people notice from the other side of the car park. The characters look chunkier and the shadow is stronger.
Things to check before you choose 6mm
A deeper plate is a thicker plate, so it’s worth a quick look at where it’s going.
- Front plate clearance. Some cars have a plate mount close to the grille or a parking sensor nearby. Check there’s room for the plate to sit flat with the characters standing out a further 6mm.
- Rear plate recess and tailgate. On a shallow recess, or where a tailgate handle or camera sits just above the plate, measure first. If you’re unsure, send us a photo on WhatsApp.
- Fixing. We fit with adhesive pads as standard. Drilling a plate voids our 3-year warranty. Our how to fit number plates guide covers pads, screws and holders, and our magnetic number plates guide covers a no-drill fixing you can take off.
- Cleaning. A deeper character has more edge for dirt to sit against. A soft cloth and car shampoo does it; our guide to cleaning number plates has the details.
None of this applies to 3mm in the same way, which is one reason it’s the safer first choice if you’re unsure.
Gel or no gel?
Both depths come with an optional gel finish. A 4D gel plate has a glossy gel layer over the raised acrylic characters, which gives a smoother, wet look. It’s £15 more on either depth: £59.99 for 3mm gel and £79.99 for 6mm gel. Some sellers call this 5D; our guide to what 5D number plates are explains the name. Gel is legal on the same terms as the rest, as our guide to whether gel plates are legal explains. At our workshop, 4D gel outsells 3D gel.
If you’re comparing every style, not only 4D, our guide to what number plates cost puts the prices side by side. Riding a bike? We now make 4D motorbike plates in 6mm too.
What we see at the counter
About 9 in 10 of the 4D plates we make are 3mm. If you can’t decide, 3mm is the depth most of our customers choose.
We rarely see 4D plates bought elsewhere with coloured or clear character sides. When one does come in, we tell the customer straight: colour on the characters is illegal, and the plate needs replacing.
Getting your 4D plates made
Whichever depth you choose, the process is the same as any plate. You’ll need photo ID and proof you’re entitled to the registration, usually the V5C logbook; our documents guide lists everything that counts. Order online by 2pm and we dispatch the same day once your documents arrive, with free Royal Mail Tracked 48, or collect free from our Hounslow workshop. We can also fit car plates in store for £30, booking required.
Our 4D plates
4D plates in 3mm or 6mm, made by a DVLA-registered supplier. Order by 2pm for same-day dispatch once your documents are in, with free tracked delivery or free collection in Hounslow.
Shop 4D platesCollect in HounslowWhatsApp3mm vs 6mm 4D number plates: FAQs
What does 3mm or 6mm mean on a 4D number plate?
It’s the thickness of the raised acrylic characters, so how far they stand out from the plate. The character height, width and spacing are the same on both.
Are 6mm 4D number plates legal in the UK?
Yes, if they’re made properly. The law doesn’t set a maximum depth for raised characters. The plate must still be reflective, carry BS AU 145e, use a single shade of black (sides included) and have characters that can’t come off.
Is 6mm or 3mm better?
Neither is better in law. 6mm looks bolder and casts a deeper shadow; 3mm is subtler, cheaper and the safer pick where space around the plate is tight. About 9 in 10 of our 4D orders are 3mm.
How much more is a 6mm 4D plate?
£20 a pair from us: £44.99 for 3mm and £64.99 for 6mm. With a gel finish it’s £59.99 and £79.99.
Will a 6mm plate fit my car?
On most cars, yes. Check there’s room in front of the front plate mount and in the rear recess, or send us a photo on WhatsApp and we’ll tell you.
Do 4D plates pass the MOT?
A 4D plate made to the rules passes like any legal plate. A plate that doesn’t meet the rules is a fail.